Modbus Duct Immersion Temperature Sensor ANDKNTF/MD RS485 sensor is equipped with dew point resistance by default. In combination with an immersion sleeve, the ANDKNTF/MD can also be used for measuring the temperature of liquid/non-aggressive media. Gaseous media may be measured with the help of our mounting flange ANDMF. The sensors are equipped with a standardized 0…10 V or 4…20mA output and can be connected to any PLC or DDC.
Additional options for sensor ANDKNTF/MD (surcharges):
- mounting flange,
- immersion sleeve – brass,
- immersion sleeve – stainless steel
- display,
- relay.
Sensor type:
- Modbus sensor
Alternative sensor versions:
- Passive Duct Immersion Temperature Sensor ANDKNTF,
- Active Duct Immersion Temperature Sensor ANDKNTF/MU.
Product number
Product number: ANDKNTF/MD
Technical Specifications
| Measuring transducer | |
| Required temperature sensor: | Pt1000 class B (2-wire) |
| Power supply: | 12-34 VAC/VDC with 4-20 mA |
| 12-34 VAC/VDC with 0-10 V | |
| Analog output burden (4…20 mA): | 50-500 Ohm |
| Analog output burden (0…10 V): | 10-100 kOhm |
| Power input with 0…10 V: | 20 mA |
| Power input with 4…20 mA: | 24-44 mA |
| Accuracy: | ±0,2K + max. 3 % full scale |
| Measuring range: | 24 measuring ranges available |
| Operating temperature: | -30 °C … +70 °C |
| Connection: | 3-wire (2-wire optional with 4-20 mA) |
| Norms: | CE, Electromagnetic Compatibility acc. EN 61326-1 2013, EG Act 2004/108/EG |
| Temperature Sensor | |
| Measuring range: | -50 °C … +180 °C |
| Temperature sensor: | Pt1000 class B (2-wire) |
| Connection: | Screw clamps, max 1.5 mm² |
| Protection sleeve: | Ø6mm stainless steel |
| Tmax. (housing): | +100 °C |
| Housing: | PA6 15% GK, Colour RAL 9011 |
| Measurements Housing: | 75 x 69 x 44 mm |
| Protection class: | IP65 |
| Mounting equipment (optional): | Immersion sleeve, Mounting flange, screw clamps |
Datasheet ANDKNTF/MD
Additional information for ANDKNTF/MD
| Protocol: | Modbus (ASCII/RTU), RS485 |
| Power supply: | 12-34 VAC/VDC |
| Dimensions: | 75 x 69 x 44 mm |
| Housing: | PA6, Color RAL 9011 |
| Protection class: | IP65 |
| Sensor: | Duct Sensor |
Similar products
Immersion sleeves
If you need immersion sleeves for the sensor, you can see them on the following link: Immersion sleeves
TALK TO AN EXPERT
Interested in our products? Looking for options or a specific quote? Contact us with your custom enquiry!