Cable Temperature Sensor ANDKBTF/MU active is for measuring the temperature in gaseous media. In combination with an immersion sleeve, ANDKBTF/MU can also be used for measuring the temperature of liquid media (as in pipes, kettles or water tanks). With the help of the respective sensors (see below) , the device can be connected to all conventional control and display systems. The versions with PVC and silicone connections feature a double roller-burnished sleeve as standard. The fiberglass/VA version is hexagon-shaped. The sensors are equipped with a standardized 0…10 V or 4…20mA output and can be connected to any PLC or DDC.
Additional options for sensor ANDKBTF/MU (surcharges):
- power supply cord/meter,
- display,
- relay.
Sensor type:
- Active sensor
Alternative sensor versions:
- Passive cable temperature sensor ANDKBTF,
- Modbus cable temperature sensor ANDKBTF/MD.
Are you seeking a passive sensor?
Here, you can find details about Andivi’s Cable Surface Temperature Sensor ANDKBTF.
Product number
Product number: ANDKBTF/MU
Technical Specifications
Measuring transducer | |
Required temperature sensor: | Pt1000 class B (2-wire) |
Power supply: | 12-34 V AC/V DC with 4-20 mA |
12-34 V AC/V DC with 0-10 V | |
Analog output burden (4…20 mA): | 50-500 Ohm |
Analog output burden (0…10 V): | 10-100 kOhm |
Power input with 0…10 V: | 20 mA |
Power input with 4…20 mA: | 24-44 mA |
Accuracy: | ±0,2K + max. 3 % full scale |
Measuring range: | 24 measuring ranges available |
Operating temperature: | -30 °C … +70 °C |
Connection: | 3-wire (4-20mA; optional 2-wire) |
Norms: | CE, Electromagnetic Compatibility acc. EN 61326-1 2013, EG Act 2004/108/EG |
Temperature Sensor | |
Measuring range: | See table |
Temperature sensor: | Pt1000 class B (2-wire) |
Length supply cord: | 2 meters (Standard) |
Connection: | Screw clamps, max 1.5 mm² |
Protection sleeve: | Ø6 x 50 mm stainless steel |
Tmax. (housing): | +100 °C |
Housing: | PA6 15% GK, Colour RAL 9011 |
Measurements Housing: | 75 x 69 x 44 mm |
Protection class: | IP65 |
Mounting equipment (optional): | Immersion-sleeves, screw clamps |
We have summarized the scaling of temperature and humidity according to the voltage 0-10V or 4-20mA.
You can also explore our range of Active Temperature Sensors and find the ideal solution for your specific monitoring and control needs or find out more about Mean Value Temperature Sensor ANDMWTF.
Datasheet ANDKBTF/MU
Versions of ANDKBTF/MU
Type | Output | PVC to 105°C | Silicone to 180°C | Silicone HT to 250°C | Glass side to 400°C |
ANDKBTF/MUV/P | 0…10 V | yes | no | no | no |
ANDKBTF/MUV/S | 0…10 V | no | yes | no | no |
ANDKBTF/MUV/T | 0…10 V | no | no | yes | no |
ANDKBTF/MUV/G | 0…10 V | no | no | no | yes |
ANDKBTF/MUA/P | 4…20mA | yes | no | no | no |
ANDKBTF/MUA/S | 4…20mA | no | yes | no | no |
ANDKBTF/MUA/T | 4…20mA | no | no | yes | no |
ANDKBTF/MUA/G | 4…20mA | no | no | no | yes |
How to order?
Order example: ANDKBTF/MU sensor with silicone cable and 4-20 mA output signal = ANDKBTF / MUA / S
Similar products
Immersion sleeves
If you need immersion sleeves for the sensor, you can see them on the following link: Immersion sleeves



TALK TO AN EXPERT
Interested in our products? Looking for options or a specific quote? Contact us with your custom enquiry!