Protective sleeves are most often used as accessories for the installation of temperature sensors in pipe or duct installations. They are most commonly used when it comes to measuring the quantities in liquid media.
Their use is most common with duct temperature sensors, for example, a Duct temperature sensor or a Cable temperature sensor.
Protective sleeves are available in various versions:
- various materials: brass and stainless steel,
- different mounting lengths: 50/100/150/200/250/300/350/400 mm or custom (according to customer’s needs)
- various temperatures: from basic ones, suitable for up to + 160 °C to special versions, suitable for up to +400 °C and special performances suitable for up to +700 °C.
- various pressures: from 16 bars up to 40 bars (Static)
- The protective sleeves can also be supplied with the pressure screw (optional).
Areas of application are:
- construction,
- boilers and stoves,
- industrial,
- for various devices and mechanical systems,
- heating,
- ventilation,
- cooling,
- and more …
Brass immersion sleeves
Article number
Article number: ANDTHMS
Technical specifications
| Fitting dimensions: | see Technical Drawing |
| Fitting length: | 50 / 100 / 150 / 200 / 250 / 300 / 350 / 400 mm |
| Material: | Galvanized brass |
| Thread socket: | G1/2“ DIN EN10226-1 (tapered)) |
| Width across flats: | SW22 |
| Max. operating temperature: | +160°C |
| Pressure range: | up to 16 bar, static |
Brass immersion sleeves with pressure screw
Article number
Article number: ANDTHMS2
Technical specifications
| Fitting dimensions: | see Technical Drawing |
| Fitting length: | 50 / 100 / 150 / 200 / 300 / 400 mm |
| Material: | Galvanized brass |
| Thread socket: | G1/2“ DIN EN10226-1 (tapered)) |
| Width across flats: | SW22 |
| Pressure screws (incl. silicone gasket): | SW12 |
| Max. operating temperature: | +160°C |
| Pressure range: | up to 16 bar, static |
Stainless steel immersion sleeve
Article number
Article number: ANDTHVA
Technical specifications
| Fitting dimensions: | see Technical Drawing |
| Fitting length: | 50 / 100 / 150 / 200 / 250 / 300 / 350 / 400 mm |
| Material: | Stainless steel 1.4571 |
| Thread socket: | G1/2“ DIN 2999 |
| Width across flats: | SW27 |
| Max. operating temperature: | +400°C |
| Pressure range: | up to 40 bar, static |
Stainless steel immersion sleeve welded, with pressure screw and clamp ring
Article number
Article number: ANDTHVA2
Technical specifications
| Fitting dimensions: | see Technical Drawing |
| Fitting length: | 50 / 100 / 150 / 200 / 300 / 400 mm |
| Material: | Stainless steel 1.4571 |
| Thread socket: | G1/2“ |
| Width across flats: | SW24 |
| Pressure screws (incl. silicone gasket): | SW12 |
| Max. operating temperature: | +160°C |
| Pressure range: | up to 40 bar, static |
Stainless steel immersion sleeve welded, with G1/2″ Inside-and-connective thread
Article number
Article number: ANDTHVA3
Technical specifications
| Fitting dimensions: | see Technical Drawing |
| Fitting length: | 54 / 104 / 154 / 204 / 304 / 404 mm |
| Material: | Stainless steel 1.4571 |
| Thread socket: | G1/2“ |
| Width across flats: | SW27 |
| Inner diameter: | 6,5 mm |
| Max. operating temperature: | +700°C |
| Pressure range: | up to 40 bar, static |
