Stevenson Screen ANDWHT exist various fields of application of our weather shelter in a home and building automation. They‘re used to regulate actuators depend on the temperature and the measured moisture. The standardized output signals of 0-10V or 4-20mA make it easy to connect it with an existing control unit. The sensor provides an analog output signal, which is linear to moisture and temperature.
Product number
Product number: ANDWHT
Technical specification
Power supply (0…10 V): | 12 … .34 VAC/VDC |
Power supply (4 … 20 mA): | 12 … .34 VAC/VDC |
Sensor element (humidity): | Capacitive sensor |
Sensor element (temperature): | Capacitive sensor |
Measuring range of humidity: | 0…100% r.h. |
Output Humidity: | 0…10V or 4…20mA |
Tolerance Humidity 35% … 70% r.h.: | ± 2% (25…90% r.H.) |
Measuring ranges temperature: | -30 °C … +70 °C |
Output temperature: | 0…10V or 4…20mA |
Temperature tolerance: | ± 0,5K |
Load at analog 0-10 V output: | 10…100 kOhm |
Analog output burden (4 … 20 mA): | 300…1000 Ohm |
Operating temperature: | -30°C … +70°C |
Operating range: | 0…98% r. h. |
Response time (r.h.): | 8 Sec. (63% at condensation) |
Connection: | Screw clamps 1,5 mm² |
Housing: | Grey |
Measurements housing: | 265 x 155mm |
Protection class: | IP65 |
Not what you are looking for? Here, you can find some additional information about Andivi’s Wind Sensor ANDWM1, ANDWST Weather Station or Wind Direction Sensor ANDWM2.
Datasheet ANDWHT
Versions of ANDWHT
Type | Output Temp. | Output Humidity |
ANDWHT/U | 0…10 V | 0…10 V |
ANDWHT/I | 4…20mA | 4…20mA |
ANDWHT/U-230V | 0…10 V | 0…10 V |
ANDWHT/I-230V | 4…20mA | 4…20mA |
How to order?
Order example: Stevenson Screen ANDWHT with 0…10 V Output signal = ANDWHT / U
Similar products


TALK TO AN EXPERT
Interested in our products? Looking for options or a specific quote? Contact us with your custom enquiry!