Application – Condensation Monitor
Condensation Monitor ANDKDW2 and ANDKDW2EXT or condensation sensors are typically mounted to cooling and cold water pipes (pipe mounted), cooling ceilings or other cooled surfaces.
Both models offer reliable detection of condensation and protect the objects against the former.
The ANDKDW2EXT has an external measuring point and can easily be mounted in confined spaces.
ANDKDWs can be used as monitors on cooling ceilings and pipes and the additional internal switching output is capable of activating heatings or other actuators.
Product number: ANDKDW2 / ANDKDW2EXT
|Switching point:||Adjustable between 80 and 100 %|
|Switching hysteresis||ca 5% r. h.|
|Operating range:||0…100% r. h.|
|Measuring medium:||Ambient air without atmospheric pollution|
|Response time:||ca. 120 sec at switching point from 75 % to condensation|
|Power supply cable – KDWext:||2000mm silicon up to 180°C|
|Operating voltage||20…34 VAC/VDC|
|Operating current (at 24 VDC):||max. 30 mA with energized relay|
|Relais:||max. 15 mA with a deenergized relay.|
|LED :||red when the relay is energized|
|Switching characteristics:||Isolated relay with switching contact, closed at normal operation (condensate-free). Open at missing operating voltage or forming of condensation.|
|Contact voltage::||max. 60 Vss|
|Switching current:||Max. 1 A AC/DC|
|Display:||LED green (relay deenergized)|
|LED red (relay energized)|
Versions of ANDKDW2 / ANDKDW2EXT
How to order?
Order example: Condensation Monitor = ANDKDW2