The wind direction sensor used to detect the wind direction, the evaluation system is integrated in the wind sensor. It is used a sensor in home automation and building automation. They are used for actuators in dependence on the wind direction to use. Through the standardized output signal of 0-10V or 4-20mA, you can easily connect them to existing controls and regulations.
Interested in similar products?
Our Wind Sensor ANDWM1 detects wind speed (0-35 m/s) for home and building automation, using integrated evaluation and 0-10V or 4-20mA outputs to control actuators. Here, you can explore more about Andivi’s Combined Wind Sensor and Wind Direction Sensor.
Product number
Product number: ANDWM2
Technical Specifications
| Power supply: | 24 AC/DC or 230 VAC |
| Start speed: | Ca. 1 m/s |
| Max. wind load: | 50 m/s |
| Output: | 0…10V or 4…20mA |
| Height: | 220mm |
| Mast holder: | max. 50mm Diameter |
| Weather vane: | 350mm |
| Protection class: | IP65 |
Not what you are looking for? Here, you can explore our full range of Andivi Anemometers for Measuring Wind Speed and Wind Direction or find out more information about The Differences Between Wind Sensors. Additional information about ANDWST Weather Station or Stevenson Screen ANDWHT weather shelter for home and building automation can be found here.
Datasheet ANDWM2
Versions of ANDWM2
| Type | Output | Power supply |
| ANDWM2/24-U | 0-10 V | 24 AC/DC |
| ANDWM2/230-U | 0-10 V | 230 VAC |
| ANDWM2/24-I | 4-20mA | 24 AC/DC |
| ANDWM2/230-I | 4-20mA | 230 VAC |
How to order?
Order example: ANDWM2 sensor with Output signal 0…10 V with Power supply 230V = ANDWM2 / 230-U
Similar products
TALK TO AN EXPERT
Interested in our products? Looking for options or a specific quote? Contact us with your custom enquiry!