Modbus Contact Temperature Sensor Brass ANDANTF3MS/MD RS485 sensor is for measuring the temperature on round surfaces such as pipes. The sensors are available as stainless steel and brass versions. The rounded edge at the end of the sensor and the included tension band allow for easy mounting on pipes. The sensors are equipped with a standardized 0…10 V or 4…20mA output and can be connected to any PLC or DDC. A tension band is included in the delivery.
Additional options for sensor ANDANTF3MS/MD (surcharges):
- display,
- relay.
Sensor type:
- Modbus sensor
Alternative sensor versions:
- Passive Contact Temperature Sensor Brass ANDANTF3MS,
- Active Contact Temperature Sensor Brass ANDANTF3MS/MU.
Product number
Product number: ANDANTF3MS/MU
Technical Specifications
Measuring transducer | |
Required temperature sensor: | Pt1000 class B (2-wire) |
Power supply: | 12-34 V AC/V DC with 4-20 mA |
12-34 V AC/V DC with 0-10 V | |
Analog output burden (4…20 mA): | 50-500 Ohm |
Analog output burden (0…10 V): | 10-100 kOhm |
Power input with 0…10 V: | 20 mA |
Power input with 4…20 mA: | 24-44 mA |
Accuracy: | ±0,2K + max. 3 % full scale |
Measuring range: | 24 measuring ranges available |
Operating temperature: | -30 °C … +70 °C |
Connection: | 3-wire (2-wire optional with 4-20 mA) |
Norms: | CE, Electromagnetic Compatibility acc. EN 61326-1 2013, EG Act 2004/108/EG |
Temperature Sensor | |
Measuring range: | -50 °C … +200 °C |
Temperature sensor: | Pt1000 class B (2-wire) |
Connection: | Screw clamps, max 1.5 mm² |
Material contact element: | Brass |
Power supply cord: | 2 m Silicone |
Tmax. (housing): | +100 °C |
Housing: | PA6 15% GK, Colour RAL 9011 |
Measurements Housing: | 75 x 69 x 44 mm |
Protection class: | IP54 |
Mounting equipment (incl.): | Tension band |
Additional info for ANDANTF3MS/MD
Protocol: | Modbus (ASCII/RTU), RS485 |
Power supply: | 12-34 VAC/VDC |
Dimensions: | 75 x 69 x 44 mm |
Housing: | PA6, Color RAL 9011 |
Protection class: | IP65 |
Sensor: | Contact Temperature Sensor |