Immersion Thermostat Double Thermostat ANDDTTH1 is specially designed to guarantee an optimal control and adjustment of temperature behavior inner pipes and drain pipes.
Product number
Product number: ANDDTTH1
Technical specification
| Temperature adjustment range: | Controller 0 °C … +90 °C, Limiter +90 °C … +110 °C |
| Tolerance: | Controller ± 5 K, Limiter -15 K; -6 K (acc. model) |
| Differential: | Controller 6 ± 2 K; 4 ± 1 K (acc. model) Limiter 25 ± 8 K; 15 ± 8 K (acc. model) |
| Reset: | manual and automatic |
| Protection class: | IP 40 |
| Insulation class: | I |
| Temperature gradient: | <1K/min. |
| Max. start temperature: | +80°C |
| Max. sensor temperature: | +125°C |
| Storage temperature: | -15°C…+55°C |
| Max. envelope pressure: | 10 bar |
| Response time: | <1’ |
| Load at contacts: | C-1 REG.: 10(2,5) A / 250 VAC C-2 REG.: 6(2,5) A / 250 VAC C-1 LIM.: 0,5 A / 250 VAC C-2 LIM.: 10(2,5) A / 250 VA |
| Cable inlet: | M20 x 1,5 |
| Immersion sleeve, brass R1/2”: | 15 x 16 x 100 mm |
PRODUCT ENQUIRY
Looking for a larger quantity? Do you need a variety of the product offered? Send us your custom enquiry.
Datasheet ANDDTTH1
Versions of ANDDTTH1
| Type | Model |
| ANDDTTH1 | Double Thermostat |
