We can use the Andivi NDV Card reader for access solutions where we want to maintain the existing door handle.
The external RFID NDV-WRFIDk reader is built into the wall, directly adjacent to a door of the hotel room. When a guest approaches the reader with the contactless card the electric strike unleashes the tab which will allow the guest to open the door.
Every RFID reader can be coded for a specific room.
The NDV-WRFIDk reader can be programmed to an unlimited number of cards with the same access restrictions. It can be applied in hotels, apartments, elderly homes, student dorms or parts of commercial buildings where limited access is required. For example to fitness, swimming pool, spa area, sports facilities, conference rooms and other areas.
Programming: With software NDV-SW 2.1 and encoder for RFID cards NDV-E1
Use: unlocking with different Mifare cards (hotel room, apartment)
Housing: IP65 (Protected from low-pressure water jets from any direction, limited ingress protection)
Colors: white (matt), black (matt) and any other color according to RAL
Two parts that belong to card reader NDV-WRFIDk whereby the card reader is connected to a system for opening the door of an apartment or hotel room or the common corridor are access control power supply NDV-PS (12 V) and electric strike NDV-ES.
The card reader can be programmed to unlimited different cards with the same access restrictions and is applicable in hotels, apartments, elderly homes, student dorms or part of commercial buildings where limited access is required.
Power supply: 12 V DC
Reading range: 3-7 cm
Dimension: 73 × 113 × 15 mm
Weight: 83 g
Installation: mounted on wall
The NDV-PS access control power supply supplies electrical power to the electric strike. It has a timer that limits the time when strike is released and allows door to be opened.
Output voltage: 12 V DC
Input voltage: 110 – 240 V AC
Output current: 3A
Dimension: 120 × 95 × 34 mm
Weight: 311 g
Operating temperature: -20°C – 65°C
Installation: mounted in control cabinet
The NDV-ES electric strike for mounting into the door frame. The strike opens the door when a guest approaches the reader with a contactless card that has access to entering the room.
Power supply: 12 V DC
Dimension: 150 × 39,5 × 31 mm
Weight: 326 g
Installation: mounted on door frame
Great solution if you already have a door handle.
Here you can see the connection schemes of some typical use cases of access control with the help of the Andivi NDV-WRFIDk card reader.
Easy access to hotel rooms or apartments with contactless cards.