SALTO Danalock Smart Lock Adaptor for euro profile cylinders has been designed to fit the Danalock v3 electronic lock in combination with double clutch mechanical cylinders. This avoids the need to use the special Danalock cylinders to fit the lock to the door.
What’s in the box?
- key turner adapter
- extra rosette
- key fitting adapter
- small Allen key
Mounting a Danalock adapter to an existing cylinder requires everything in the package:
- key turner adapter
- extra rosette
- key fitting adapter
- small Allen key
You need some more gadgets that are not included in the package:
- meter
- the pen
- a key saw to cut off the key
- grinder
The extra rosette that comes with the Danalock lock and a special key fitting adapter are not required.
Installation guide: Key Turner Adapter
- The cylinder must be at least 3 mm protrusions on the inside of the door, that the extension works.
2. Insert the key from the inside of the door into the lock.
3. When the key is inserted into the lock (on the inside of the door), measure and mark on the key (custom 6 -7 mm) with a stylus where the upper part of the key will be sawed.
We cut off the key at the marked spot.
4. The recovered key is then inserted into the lock on the inside of the door. We install Danalock key turner adapter on it.
5. Slide the adapter against the door and screw it on.
6. Attach a rosette to the adapter.
7.Insert the key fitting adapter on the back of the Danalock lock. Slide Danalock adapter until the click ensures that it is firmly attached to the Danalock lock.
8. Install the Danalock lock on the back panel. Make sure to place the part of the key that looks out of the lock in the center of the key holder.
At the edge of the black back panel on the Danalock lock, look for the small notch that you align with the notch on the back that you attached to the hook.
Soft mechanism to lock and unlock.
9. Check: Soft unlocking and locking from the outside of the door.
Check: Soft unlocking and locking from the inside of the door.
10. If the battery is not inserted, follow the diagram below. Battery activation – Pull out the plastic tab to activate the batteries. The flashing light on the Danalock lock confirms that the lock is ready for use.
11. Your Danalock lock is door-mounted. Download the Danalock app on your mobile to complete the installation. Before you download the Danalock app: Do not close the door! Leave the door open during calibration. Instructions for using the Danalock V3 mobile application can be found here.
Check if you need to exchange the Cylinder or use the Danalock Key Turner Adapter: Manual for Danalock Cylinder