DIN-Rail Measuring Transducer for PT1000 ANDMUF-HS records the temperature via a connected Pt1000 sensor and converts the value into a standardized analogue output signal in the range between 0-10V/4-20 mA. The transmitter has an EMG housing and the Pt1000 can be connected by 2- or 3-wire. 24 measuring ranges can be selected and adjusted with the help of a DIP switch. On request additional options can be offered. Offset can be corrected by ±8°K using the potentiometer.
Versions of ANDMUF-HS:
- ANDMUF-HS-I-PT1000 (4-20mA)
- ANDMUF-HS-U-PT1000 (0-10V)
Product number – DIN-Rail Measuring Transducer for PT1000
Product number: ANDMUF-HS
Technical Specifications – DIN-Rail Measuring Transducer for PT1000
| Power supply: | 12 … 34 VAC/VDC |
| Load analog output: | 50 … 500 Ohms (at 4 … 20 mA) |
| Load analog output: | 10… 100 kOhms (at 0-10 V) |
| Power input at 0…10V: | 20 mA |
| Power input at 4…20mA: | 24 … 44 mA |
| Accuracy: | ± 0,2 K + max 3% full scale |
| Measuring range: | 24 measuring ranges available |
| Operating temperature MUF: | -30 °C … +70 °C |
| Required temperature sensor: | PT1000 DIN EN 60751, Class B (2-wire) |
| Connection: | Screw clamps 1,5 mm² |
| Housing Material: | Polycarbonate PC-F |
| Measurements Housing: | 15 x 75 x 53 mm |
| Protection class: | IP65 |
| Norms: | CE, Electromagnetic Compatibility acc. EN 61326-1 2013, EG Act 2004/108/EG |
| Connection: | 3-wire (2-wire optional with 4-20 mA) |
Datasheet ANDMUF-HS
Similar products
TALK TO AN EXPERT
Interested in our products? Looking for options or a specific quote? Contact us with your custom enquiry!