The Danalock App is used as main control for all Danalock products. Go to App Store or Google Play to download the app.
Danapad V3 – Basic App Guide
1. About Danapad V3
The Danapad V3 wireless keypad lets you operate the Danalock V3 with PIN codes. When your Danalock V3 has been paired with a Danapad V3 it can be operated with PIN codes as well as through the Danalock App.
2. Setting Up Danalock V3 with a Danapad V3
Make sure that your Danalock V3 has the latest firmware installed. Add the Danapad V3 in the Danalock App. Go to „MENU > ADD NEW DEVICE“ and select your Danapad V3. Now go to „MENU > MY ACCESSORY DEVICES“ and select your Danapad V3 to access its settings.
3. How to Access a Danapad V3
The functionality of your Danalock V3 can be extended by installing accessory devices. You can find all your currently connected accessory devices by going to „MENU > MY ACCESSORY DEVICES“. You can add new accessory devices in the same way as other Danalock devices by going to „MENU > ADD DEVICE“.
4. Create a PIN Code
In the Danapad V3 settings select „PIN CODES“. Create a new PIN code by pressing the „ADD“ button. Enter a PIN code combination between 4 – 10 digits and select if the PIN code should be permanent or temporary.
5. Rename a Danapad V3
You can change the name of your Danapad V3 by pressing „NAME“ in the „SETTINGS“ list of your Danapad V3 and entering the desired name.
6. Easy Lock Function
The Danapad V3 locks with only a single push of the lock button. Press „EASY LOCK“ in the „SETTINGS“ list of your Danapad V3 and check the toggle switch on.
7. Vacation Mode Function
You can disable access via the Danapad V3 temporarily if you are leaving home for a while. Vacation mode will disable all PIN codes for the Danapad V3 while it is turned on. Press „VACATION MODE“ in the „SETTINGS“ list of your Danapad V3 and check the toggle switch on.
8. Delete a Danapad V3
To remove the Danapad V3 start by unpairing it from your Danalock device. In the Danapad V3 „SETTINGS“ list press „PAIRING > UNPAIR DEVICE“. When the Danapad V3 has been unpaired press „DELETE“ in the „SETTINGS“ list.
9. Firmware Update
Before updating the firmware make sure that the phone is at a sufficient power level. Start updating the firmware of your Danapad V3 by pressing „FIRMWARE“ in the „SETTINGS“ list of your Danapad V3. The App checks installed firmware and updates it if there is a newer one available. It is important that you keep your phone near the Danapad V3 during the firmware update process.
