Danabridge allows operating with Danalock products remotely
Danabridge V3 WiFi module, a part of the Danalock ecosystem, enables remote access to your home, office or apartment by providing your Danalock V3 smart lock with an internet connection.
Danabridge is a supplement for Danalock V3 and by using it the user will gain complete control over the Danalock smart lock from anywhere and anytime.
Using the Danabridge V3 does not change the use of the smart lock Danalock because it is just one great addition that allows you to use Danalock on another level.
.
Danabridge functionalities
- Manage and control the Danalock smart lock from anywhere.
- Additional control of your home.
- Easy installation.
- High level of security
.
Remotely operate with your Danalock using Danabridge
Danabridge V3 allows remote locking, unlocking and control of entry into your home, apartment, mobile home or room, via a mobile Danalock application on a smartphone or tablet. The wifi bridge which you have to install somewhere inside the apartment communicates with the smart lock Danalock via Bluetooth connection. In order to communicate with Danalock V3, Danabridge V3 acts as a bridge between Wifi and Bluetooth.
For example, the wifi signal (about locking or unlocking the door) that you send with your Danalock app on your phone, Danabridge converts to a Bluetooth signal which communicates with Danalock. And vice versa, Danalock sends a Bluetooth signal to Danabridge and with the help of WiFi, via a home router, it sends a signal to the Danalock user’s smart device.
.
Danabridge – Simple set up for every user
The setup is super simple since you just have to plug the Danabridge WiFi module into a power and connect to your Wifi network. You have two options for power connection via USB cable for USB connection or with power supply for the socket connection.
When searching for the right place to put Danabridge in your apartment you have to have in mind that Danabrige should be in the Bluetooth range of Danalock so that they can successfully communicate with each other. After that you just have to connect Danabridge to Danalock app and pair it with Danalock lock.
.
Monitor your home with strong security
Using Danabridge V3, you will always know, when the lock is used – and by whom. But there is no worries for leaking or losing this data because Wifi module is part of the Danalock ecosystem that is using an advanced encryption standard for transferring data AES 256. To show how strong this standard is, assuming that using a very powerful computer It would take approximately 4 trillion years to exhaust the keyspace.
.
Compatibility of Danabridge with other Danalock products
Compatibility of Danalock products
Danalock | Danapad | Danabridge | Universal module | |
Danalock | ✔ | ✔ | ✖ | |
Danapad | ✔ | ✔ | ✔ | |
Danabridge | ✔ | ✔ | ✔ | |
Universal module | ✖ | ✔ | ✔ |
Danapad V3
Danapad V3 is a wireless keypad that works with Danalock or Universal module. The PIN codes on Danapad can be set remotely via MyDanalock.com web tool for managing users and Danalock devices. If you want to set remotely PINs you will need Danabridge that creates a connection between Danapad (Bluetooth), Danalock (Bluetooth) and web tool (WiFi). Without Danabridge V3 you cannot administrate pin codes remotely.
Universal module V3
Universal Module V3 allows you to use other components of a smart home as for example other electronic devices using the Danalock app. The universal module operates independently from Danalock lock using the same mobile app. For using a universal module buying a Danalock Lock is not required as it is for other components. If you want for example to open your garage door or fence remotely you can use Universal Module V3 and Danabridge V3 which creates a connection between Danalock app and Universal module, so you can operate with electrical devices that are connected to Universal module V3 remotely.